LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Sliding Roof, Soft Top, Top Attachments - 212 Chassis) >> Testing & Repair >> Remove/install panoramic sunroof drive guide rail - AR77.21-P-0430EW

Remove/install panoramic sunroof drive guide rail - AR77.21-P-0430EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 166, 212.0/1/2 with CODE (413) Panoramic glass roof with top sliding roof 

Shown on model 212.0 on right side of vehicle 

Fig 1: Panoramic Sunroof Drive Guide Rail Remove/Install Components - Shown On Model 212.0
G09977477Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
DANGER Risk of injury  caused by fingers being pinched or crushed  when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof Keep body parts and limbs well clear of moving parts. AS00.00-Z-0011-01A
1 Remove front glass roof from panoramic sliding roof Model 166 AR77.21-P-0500GQ
Model 212.0, 1, 2 AR77.21-P-0500EW 
2 Remove roller sun blind from panoramic sliding roof   AR77.21-P-0215EW 
3 Remove roller sun blind motor on panoramic sliding roof Model 166 AR77.21-P-0490GQ
Model 212.0, 1, 2 AR77.21-P-0490EW 
4 Remove panoramic sliding roof motor Model 166 AR77.21-P-6995GQ
Model 212.0, 1, 2 AR77.21-P-6995EW 
5 Unscrew bolts (3) on left or right gate with lid carrier (2) and remove gate with lid carrier (2) IMPORTANT Adjust gate with lid carrier (2) with emergency adjustment feature.
Rechargeable drill/screwdriver
 
6 Unscrew bolts (7) and remove reinforcement (8) Rechargeable drill/screwdriver  
7 Unscrew bolts (4, 5, 6) and pull guide rail (1) with drive cable out of guide tubes and remove INSTALLATION IMPORTANT Screw in bolts (4, 5, 6) on guide rail (1) to stop, press guide rail (1) toward outside in front and rear area and tighten bolts (4, 5, 6).
Rechargeable drill/screwdriver
 
8 Install in the reverse order