Remove/install panoramic sliding roof motor - AR77.21-P-6995EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.3, 207.3, 212.0/1/2 with CODE 413 (Panoramic glass roof with top sliding roof)
Shown on model 212.0
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1.1 | Loosen headliner (1) in front area | MODEL 204.3, 207.3 with CODE 413 (Panoramic glass roof with top sliding roof) |
|
| AR68.30-P-4300EC | |||
| 1.2 | Loosen headliner (1) in front area up to B-pillars | MODEL 212 with CODE 413 (Panoramic glass roof with top sliding roof) MODEL 212.0/1 with CODE 413 (Panoramic glass roof with top sliding roof) |
|
| AR68.30-P-4300EW | |||
| 2 | Lower headliner (1) and disconnect electrical connector (3) on panoramic sliding sunroof control module (A98) | Headliner (1) can be damaged. |
|
| 3 | Lower headliner (1), remove bolts (2) and take out panoramic sliding sunroof control module (A98) | Headliner (1) can be damaged. |
|
| 4 | Install in the reverse order | ||
| 5 | Perform teach-in run for anti-pinch protection and normalization of panoramic sliding sunroof | ||
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A |