LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (97 - Cables -- 92A Cayenne) >> WM 975219 Removing And Installing Wire Harness For Engine (V8 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the generator. → INSTALLING GENERATOR - section on "Installing"
  2. Install the starter. → INSTALLING STARTER - section on "Installing"
  3. Install high-pressure pump. → INSTALLING HIGH-PRESSURE PUMP - section on "Installing"
  4. Install cooling fan housing (radiator frame). → INSTALLING COOLING FAN HOUSING - section on "Installing"
  5. Install air cleaner housing at the left and right. → INSTALLING AIR CLEANER HOUSING - section on "Installing"
  6. Install cross panel at the left and right. → INSTALLING CROSS PANEL - section on "Installing"
  7. Secure ground strap for battery. → 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
scientia non olet · About LEMON Manuals