LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (10 - Engine - Crankcase, Suspension -- 92A Cayenne) >> WM 103519 Removing And Installing Engine Mounting (Cayenne S E-Hybrid) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. → REMOVING BATTERY
  2. Remove engine compartment trim panel. → REMOVING FRONT TRIM PANEL (ENGINE COMPARTMENT)
  3. Remove the complete air cleaner housing. → REMOVING AIR CLEANER HOUSING
  4. Remove power-steering reservoir and set it aside. → REMOVING RESERVOIR
  5. Remove power electronics. → REMOVING FUSE FOR POWER ELECTRONICS UNIT
  6. Support the engine on the body. → 1001IN SUPPORTING ENGINE ON THE BODY 
  7. Screw off nut -arrow-  for left engine mounting.
    Fig 1: Locating Left Engine Mounting
    G09804237Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  8. Screw off nut -arrow-  for right engine mounting.
    Fig 2: Locating Right Engine Mounting
    G09804239Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals