LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (70 - Linings, Insulation -- 92A Cayenne) >> WM 700219 Removing And Installing Front Trim Panel (Engine Compartment) (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Front Trim Panel (Engine Compartment)

Removing Front Trim Panel (Engine Compartment)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release expansion rivets -1-  and pull them out of the front trim panel (engine compartment) -2-  .

    Installation:  Align expansion rivets -1-  with the longitudinal axis of the vehicle before locking them.

  2. Lift up front trim panel (engine compartment) -2-  , guide it out at the pneumatic spring -3-  and remove it.
    Fig 1: Identifying Front Trim Panel (Engine Compartment)
    G09940625Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals