Subsequent Work
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Danger of objects or loads falling down
- Risk of squashing or crushing
→ Secure components to prevent them from falling down.
Automatic vehicles:
- Install drive plate for torque converter.
→ Installing Drive Plate For Converter .
→ Initial tightening: 25 Nm (19 ftlb.)
→ Torque angle: 120°
- Install automatic transmission.
Manual transmission vehicles:
- Install flywheel.
→ Installing Double-Mass Flywheel .
→ Initial tightening: 25 Nm (19 ftlb.)
→ Torque angle: 120°
Information
Loosen and tighten screws on the component according to specifications.
- Install the clutch.
→ Tightening torque: 23 Nm (17 ftlb.)
All vehicles:
- Loosen spindle, unscrew retaining device 9624/3 at the cross member and remove it.