LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (57 - Door Front, Central Locking System -- CARRERA (997)) >> WM 575137 Disassembling And Assembling Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front door. → Removing Door 575119 REMOVING AND INSTALLING DOORS 
  2. Position door on assembly fixture wheel mounting trolley Master Wheel 50 with optional door mount WE 00000  .
  3. Remove door trim panel. → REMOVING COVER FOR DOOR PANEL
  4. Remove rear-view mirror. → REMOVING REAR-VIEW MIRROR
  5. Remove door sub-frame. → Removing Door Unit Carrier 
  6. Remove door handle. → Removing Door Handle 
  7. Remove door lock. → Removing Door Lock 
  8. Remove front door window. → REMOVING FRONT DOOR WINDOW
  9. Remove front power windows. → REMOVING FRONT POWER WINDOWS
  10. Remove door latch snib. → Removing Door Arrester 575919 REMOVING AND INSTALLING DOOR LATCH SNIB  - removing
  11. Remove rubber seal for door. → Removing Rubber Seal For Door 576519 REMOVING AND INSTALLING RUBBER SEAL FOR DOOR  - removing
  12. Remove window channel seal. → REMOVING THE FRONT WINDOW SHAFT SEAL
  13. Remove crash support. → Removing Crash Support 574819 REMOVING AND INSTALLING CRASH SUPPORT 
scientia non olet · About LEMON Manuals