Removing Front Power Windows

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Position Of Front Power Windows

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove rubber sleeves -1- .

Fig 2: Identifying Rubber Sleeve
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unclip cable at retaining clip -1- .

Fig 3: Identifying Cable At Retaining Clip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening nuts -2- on power windows -1- .

Fig 4: Releasing Power Windows
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fold power windows -1- together and remove through the door opening -arrow- .

Fig 5: Removing Power Windows
Courtesy of PORSCHE CARS NORTH AMERICA, INC.