LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722455 Replacing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install cushion carrier for front backrest. → Installing Cushion Carrier For Front Backrest 
  2. Install bottom belt strap guide at the left and right. → Installing Belt Strap Guide
  3. Secure airbag wire harness (at the backrest side). → 975619 REMOVING AND INSTALLING WIRE HARNESS FOR SEAT (FOLDING SPORTS BUCKET SEAT)
  4. Install the side airbag. → Installing Side Airbag (Folding Sports Bucket Seat)
  5. Install bowden cable for backrest release. → 722519 REMOVING AND INSTALLING BOWDEN CABLE FOR BACKREST RELEASE (FOLDING SPORTS BUCKET SEAT) 
  6. Install upper part of lock for backrest adjustment. → Installing Lock For Backrest Adjustment 
  7. Install loop for backrest release. → Installing Loop For Backrest Release 
  8. Install cover for front backrest. → Installing Cover For Front Backrest
scientia non olet · About LEMON Manuals