LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 729319 Removing And Installing Control Unit For Memory Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Control Unit For Memory Seat Adjustment

Installing Control Unit For Memory Seat Adjustment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert electric connectors into control unit until they are felt to engage.
    Fig 1: Inserting Electric Connectors Into Control Unit
    G09829809Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position control unit on the holder and screw it down using the two fastening screws -1-  .
    Fig 2: Installing Control Unit To Seat
    G09829810Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals