Installing Cover For Front Middle Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cover For Front Middle Backrest Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Only for vehicles with heated seats.

Information

Only for vehicles with heated seats.

Connect electric plug connection for backrest seat heating -1- .

Fig 2: Connecting Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage cover for backrest -1- in the backrest frame -2- at the top -arrow A- .
Press in cover for backrest -1- in the middle -arrows B- until the locking tabs engage -inset- .

Fig 3: Installing Cover For Backrest

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Press cover for backrest -1- into the backrest shell -2- at the bottom using a plastic wedge -3- .

Fig 4: Securing Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.