LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (85 - Ventilation -- CARRERA (997)) >> WM 851519 Removing And Installing Heating/Fresh Air Unit (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2, 911 Gt3 RS, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Preliminary Work >> Preliminary work for heating/fresh air unit

Preliminary work for heating/fresh air unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain refrigerant. → Draining and filling in refrigerant
  2. Drain engine coolant. → 193817 DRAINING AND REFILLING COOLANT
  3. Remove dashboard. → Removing instrument panel
  4. Remove tunnel support. → Removing tunnel support
  5. Remove passenger's airbag unit. → Removing passenger's airbag unit
  6. Remove battery. → Removing battery
  7. Remove right plenum panel cover. → Removing Cover 
  8. Remove heat exchanger. → Removing heat exchanger
scientia non olet · About LEMON Manuals