Symptom Table

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Always perform the "Basic Inspection" before performing diagnosis in the following table. Refer to Work Flow .

Symptom		Diagnosis procedure	Reference
Manual functions (for specific part) do not operate.	Sliding operation	Check sliding switch.	Component Function Check
	Reclining operation	Check reclining switch.	Component Function Check
	Lifting operation (front)	Check lifting switch (front).	Component Function Check
	Lifting operation (rear)	Check lifting switch (rear).	Component Function Check
	Tilt operation	Check tilt switch.	Component Function Check
	Telescopic sensor	Check telescopic switch.	Component Function Check
	Door mirror operation	1. Select switch	Component Function Check
	Door mirror operation	2. Mirror switch	Component Function Check
	All parts of seat	Check power seat switch ground circuit.	Diagnosis Procedure
Memory functions (for specific part) do not operate.	Sliding operation	Check sliding sensor.	Component Function Check
	Reclining operation	Check reclining sensor.	Component Function Check
	Lifting operation (front)	Check lifting sensor (front).	Component Function Check
	Lifting operation (rear)	Check lifting sensor (rear).	Component Function Check
	Tilt operation	Check tilt sensor.	Component Function Check
	Telescopic operation	Check telescopic sensor.	Component Function Check
	Door mirror operation	Check door mirror sensor.	Driver side: Component Function Check Passenger side: Component Function Check
Memory functions and manual functions (for specific part) do not operate.	Sliding operation	Check sliding motor LH.	Component Function Check
	Reclining operation	Check reclining motor LH.	Component Function Check
	Lifting operation (front)	Check lifting motor LH (front).	Component Function Check
	Lifting operation (rear)	Check lifting motor LH (rear).	Component Function Check
	Tilt operation	Check tilt motor.	Component Function Check
	Telescopic operation	Check telescopic motor.	Component Function Check
	Door mirror operation	Check door mirror motor.	Component Function Check
Entry/Exit assist function does not operate.		1. Check system setting.	Work Procedure
		2. Perform initialization.	Work Procedure
		3. Check front door switch (driver side).	Component Function Check
Linking key fob to meter display.		1. Check door lock function.	Component Function Check
Linking key fob to meter display.		2. Perform memory storing.	Work Procedure