Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- DATA MONITOR
CONSULT
- Select "Data Monitor" mode of "AUTO DRIVE POS".
- Select "MIR CON SW-UP/DN","MIR CON SW-RH/LH ".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Status
MIR CON SW-UP/DN
Mirror switch (up/down)
Operate
ON
Release
OFF
MIR CON SW-RH/LH
Mirror switch (right/left)
Operate
ON
Release
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .