Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- DATA MONITOR
CONSULT
- Select "Data Monitor" mode of "AUTO DRIVE POS".
- Select "LIFT FR PULSE".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Value
LIFT FR PULSE
Seat lifting (front)
Operate (up)
Change (decrease)
Operate (down)
Change (increase)
Release
No change
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .