Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- DATA MONITOR
CONSULT
- Select "Data Monitor" mode of "AUTO DRIVE POS".
- Select "TILT PULSE".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Value
TILT PULSE
Steering column
Operate (UP-WARD)
Change (decrease)
Operate (DOWN-WARD)
Change (increase)
Release
No change
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .