LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission (Re0F10D) (2 Of 2)) >> Symptom Diagnosis >> CVT Control System >> CVT Control System Symptoms >> Symptom Table >> Symptom Table 2

Symptom Table 2

WARNING: This page is about a different variant/trim than selected.

Symptom

Torque converter

Transmission range switch

Oil pump

Forward clutch

Reverse brake

Planetary gear

Bearings

Parking mechanism

Stop lamp switch

Shift lock solenoid

CVT shift selector

TRANSMISSION RANGE SWITCH : Exploded View .

TRANSAXLE ASSEMBLY : Exploded View  (AWD) or TRANSAXLE ASSEMBLY : Exploded View  (FWD).

BRAKE PEDAL : Adjustment .

Component Function Check .

CVT SHIFT SELECTOR : Exploded View .

Shift Shock

Large shock (N-> D position)

2

1

Large shock (N-> R position)

2

1

Shock is too large for lock-up.

1

Slips/Will Not Engage

Vehicle cannot be started from D position.

3

1

2

Vehicle cannot be started from R position.

4

1

2

3

Does not lock-up.

1

3

2

Does not hold lock-up condition.

1

3

2

Lock-up is not released.

1

2

With selector lever in D position, acceleration is extremely poor.

1

3

2

With selector lever in R position, acceleration is extremely poor.

1

4

2

3

Slips at lock-up.

1

2

Other

No creep at all.

1

6

2

4

5

3

Vehicle cannot run in all positions.

1

2

4

5

3

6

With selector lever in D position, driving is not possible.

1

2

4

3

5

With selector lever in R position, driving is not possible.

1

2

4

3

5

Judder occurs during lock-up.

1

Strange noise in D position.

1

2

4

3

5

Strange noise in R position.

1

2

4

3

Strange noise in N position.

1

2

3

Maximum speed low.

1

5

2

4

3

With selector lever in P position, vehicle does not enter parking condition or, with selector lever in another position, parking condition is not cancelled.

1

Vehicle runs with CVT in P position.

2

1

Vehicle runs with CVT in N position.

2

3

1

Engine stall.

1

Engine stalls when selector lever shifted N -> D or R.

1

When brake pedal is depressed with ignition switch ON, selectorlever cannot be shifted from P position to other position.

1

2

3

When brake pedal is not depressed with ignition switch ON, selector lever can be shifted from P position to other position.

1

2

3