Component Function Check
WARNING: This page is about a different variant/trim than selected.
- CHECK SHIFT LOCK OPERATION (PART 1)
- Turn ignition ON.
- Shift the selector lever to "P" (Park) position.
- Attempt to shift the selector lever to any other position with the brake pedal released.
Can the selector lever be shifted to any other position?
YES
Refer to Diagnosis Procedure .
NO
GO TO 2.
- CHECK SHIFT LOCK OPERATION (PART 2)
Attempt to shift the selector lever to any other position with the brake pedal depressed.
Can the selector lever be shifted to any other position?
YES
Inspection End.
NO
Refer to Diagnosis Procedure .