Installing the backrest covering

• Correctly place the backrest covering onto the cushion.
• Secure all marked trim wires with clamps.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the clamps (2).

  Parts:  Clamps

• Insert the clamp (2) with the special tool 0 492 668 (52 0 050). 
• Clasp trim wire (3) of cushion (1) and trim wire (4) of seat cover with clamp (2) and bend clamp (2).

  1	Upholstery
  2	Clamp
  3	Trim wire in cushion
  4	Trim wire in seat cover
  5	Seat cover

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure all marked trim wires with clamps.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the clamps (2).

  Parts:  Clamps

• Insert the clamp (2) with the special tool 0 492 668 (52 0 050). 
• Clasp trim wire (3) of cushion (1) and trim wire (4) of seat cover with clamp (2) and bend clamp (2).

  1	Upholstery
  2	Clamp
  3	Trim wire in cushion
  4	Trim wire in seat cover
  5	Seat cover

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION .
• Refer to INSTALLING SIDE AIRBAG ON FRONT SEAT .
• Refer to INSTALLING THE TRIM AT THE BOTTOM OF THE APERTURE .
• Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
• Refer to REMOVING THE SEAT COVER WITH CUSHION .
• Refer to INSTALLING THE THIGH SUPPORT ON THE FRONT SEAT .
• Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT .
• Refer to INSTALLING THE LEVER FOR SEAT HEIGHT ADJUSTMENT .
• Refer to INSTALLING THE STEERING LEVER FOR BACKREST ADJUSTMENT .
• Refer to INSTALLING THE COVER FOR BACKREST ADJUSTMENT .
• Refer to INSTALLING INNER COVER .
• Refer to INSTALLING FRONT SEAT .
• Refer to INSTALLING THE FRONT STRAP FITTING .