63 12 007 Removing and installing/replacing left or right headlight (halogen headlight)

Release screws (1). Tightening torque 63 12 1AZ .

Disconnect plug connection (2).

Version with headlight cleaning system: 

• Pull headlight forwards slightly and detach hose connection (3) from high-pressure nozzle (4).

Remove headlight.

Fig 1: Identifying Halogen Headlight High Pressure Nozzle, Hose Connection, Plug Connections And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

• Adjust gap dimensions by means of adjusting screws (1)
  Fig 2: Gap Dimensions

  Courtesy of BMW OF NORTH AMERICA, INC.
• Adjust HEADLIGHTS 

Fig 3: Identifying Gap Dimension Adjusting Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• Modify HALOGEN BULB FOR HEADLIGHT 
• Modify HALOGEN BULB FOR HIGH BEAM HEADLIGHT 
• Modify BULB FOR TURN INDICATOR 
• If necessary, modify HIGH-PRESSURE NOZZLE of headlight cleaning system
• Modify adjusting screws.