63 99 072 Replacing halogen bulb for headlight on left

WARNING: This page is about a different variant/trim than selected.

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Unlock retaining tab (1) and remove protective cap (2) from headlight.

Installation note:

Protective cap (2) must be correctly engaged.

Check seal.

Replace protective cap (2) if necessary.

Fig 1: Identifying Headlight Protective Cap And Retaining Tab

Courtesy of BMW OF NORTH AMERICA, INC.

Release lock (1) and pull halogen bulb for headlight (2) out of headlight.

Disconnect plug connection (3) and remove halogen bulb for headlight (2).

Installation note:

Make sure halogen bulb for headlight (2) is correctly seated.

Fig 2: Identifying Headlight Halogen Bulb With Plug Connection And Lock

Courtesy of BMW OF NORTH AMERICA, INC.