Gear case cover, cylinders 1-6

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect plug connection (2 and 4) at solenoid valve.

Unfasten screws (1 and 3).

Release cable duct and lay to one side.

Fig 1: Identifying Connectors And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove both solenoid valves (1 and 2).

Fig 2: Identifying Solenoid Valves

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Release screw (2).

Tightening torque: see 4AZ in 11 14 CASE COVERS

Remove timing case cover (2).

Installation:

Screw (2) required to secure cable duct.

Fig 3: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Check guide sleeves (1) for secure seating and damage.

Installation:

Replace seal (2) .

Fig 4: Identifying Guide Sleeves And Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.