11 14 Case Covers
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Jump guard to crankcase | N74 | M6 | 10 Nm | |
| 2AZ Gear case cover to crankcase, bottom | N74 | M8 | 21 Nm | |
| 3AZ Gear case cover to crankcase, bottom | N74 | M10 | 38 Nm | |
| 4AZ Gear case cover to cylinder head, top | N74 | M6 | 10 Nm | |
| 5AZ End cover (oil) to crankcase (transmission side) | N74 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 6AZ End cap (coolant) to crankcase (transmission side) | N74 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 7AZ End cap to crankcase (transmission side) | N74 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |