LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mercury
>>
2010
>>
Milan Base, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 16 (Engine Cooling System (Hybrid))
Section 16 (Engine Cooling System (Hybrid))
WARNING:
This page is about a different variant/trim than selected.
Expand All (for easy ctrl-f)
Collapse All
Specifications
Material Specifications Table
General Specifications Table
Torque Specifications Table
Description And Operation
Engine Cooling
Notes
Coolant Flow Diagram
Diagnosis And Testing
Engine Cooling
Special Tool(s)
Material
Principles of Operation
Inspection and Verification
DTC Table
PCM DTC Table
Symptom Table
Pinpoint Tests
Pinpoint Test A: Loss of Coolant
Normal Operation
Pinpoint Test A: Loss Of Coolant
Pinpoint Test B: The Engine Overheats
Normal Operation
Pinpoint Test B: The Engine Overheats
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Normal Operation
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Component Tests
Cooling System Pressure Test
Thermostat
Notes
Thermostat Visual Inspection
Radiator Leak Test, Removed From Vehicle
General Procedures
Cooling System Draining, Filling and Bleeding
Special Tool(s)
Material
Notes
Draining
Filling and Bleeding with RADIATOR REFILLER
Filling and Bleeding without RADIATOR REFILLER
Cooling System Flushing
Material
Removal And Installation
Block Heater
Notes
Removal and Installation
Thermostat Housing
Notes
Removal and Installation
Bypass Tube
Notes
Removal and Installation
Coolant Pump
Material
Degas Bottle
Coolant Pump
Removal and Installation
Cooling Fan Motor and Shroud
Cooling Fan and Shroud (View 1 Of 2)
Cooling Fan and Shroud (View 2 Of 2)
Removal and Installation
Radiator
Radiator (View 1 Of 2)
Radiator (View 2 Of 2)
Removal and Installation
Degas Bottle
Notes
Removal and Installation