LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Cooling System (Hybrid)) >> Specifications >> General Specifications Table

General Specifications Table

WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATIONS TABLE

Item Specification
Pressure Tests 
Complete cooling system maximum pressure 124 kPa (18 psi)
Pressure relief cap 89-124 kPa (13-18 psi)
Radiator (out of vehicle) 138 kPa (20 psi)
Thermostat Opening Temperatures 
Thermostat starts to open 80-84°C (176-183°F)
Thermostat fully open 97°C (207°F)