Section 15 (Manual Transaxle/Transmission And Clutch - General Information)

• Specifications
  • Material
  • General Specifications
  • Torque Specifications
• Description And Operation
  • Manual Transaxle and Clutch
• Diagnostic Tests
  • Manual Transaxle and Clutch
    • Principles of Operation
    • Inspection and Verification
      • Notes
      • Verify Customer Concern
      • Check Fluid Level and Condition
      • Evaluation of Clutch Hydraulic System
      • Evaluation of the Clutch
      • Inspect the Gearshift Mechanism
      • Evaluation of the Transmission
    • Symptom Chart - Transaxle
    • Symptom Chart - Noise, Vibration and Harshness (NVH)
    • Pinpoint Tests
      • Pinpoint Test A: Clutch Slippage
        • Normal Operation
        • Pinpoint Test A: Clutch Slippage
      • Pinpoint Test B:Clutch Chatter, Rattle or Shudder
        • Normal Operation
        • Pinpoint Test B: Clutch Chatter, Rattle Or Shudder
      • Pinpoint Test C: Clutch Drag
        • Normal Operation
        • Pinpoint Test C: Clutch Drag
      • Pinpoint Test D: Clutch Pedal Pulsation
        • Normal Operation
        • Pinpoint Test D: Clutch Pedal Pulsation
      • Pinpoint Test E: Clutch Related Vibrations
        • Normal Operation
        • Pinpoint Test E: Clutch Related Vibrations
      • Pinpoint Test F: Hard Shifting
        • Normal Operation
        • Pinpoint Test F: Hard Shifting
      • Pinpoint Test G: Excessive Noise
        • Normal Operation
        • Pinpoint Test G: Excessive Noise
      • Pinpoint Test H: Fluid Leakage
        • Normal Operation
        • Pinpoint Test H: Fluid Leakage
• General Procedures
  • Clutch Disc Check
  • Clutch Pedal Freeplay Adjustment
  • Clutch Pressure Plate Check
  • Flywheel Runout Check
  • Clutch System Bleeding
  • Gearshift Cable Adjustment