LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Manual Transaxle/Transmission And Clutch - General Information) >> Diagnostic Tests >> Manual Transaxle and Clutch >> Inspection and Verification >> Evaluation of Clutch Hydraulic System

Evaluation of Clutch Hydraulic System

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the brake/clutch hydraulic fluid reservoir is filled to the correct level.
    • If the fluid level is correct, proceed to clutch check.
    • If the rear chamber fluid level is low, add fluid as necessary. Check the clutch hydraulic system for leaks and repair as necessary.