Remove/Install Brake Disc - AR42.10-P-0220LF

Model 217, 222 

Shown on front axle on model 222 

Courtesy of MERCEDES-BENZ USA

	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
Notice	Notes on handling, transport and storage of ceramic brake disks	Model 217, 222 with code B07 (AMG - ceramic brake system)	AH42.10-P-9406-13A
Notice	Notes on self-locking nuts and bolts		AH00.00-P-0001-01KOA
	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
	Remove/install
1.1	Detach brake caliper (1) with connected brake hose from front axle and place to one side	When removing brake disk (3) on front axle Do not tension or kink brake hose. Otherwise the brake hose will be damaged.	AR42.10-P-0070LF
1.2	Remove brake linings on rear axle	Model 217, 222 except code B07 (AMG - ceramic brake system) When removing brake disk (3) from rear axle The brake caliper support does not have to be removed to remove the brake disk (3).	AR42.10-P-1700LF
1.3	Remove brake linings and brake caliper supports from rear axle	Model 217, 222 with code B07 (AMG - ceramic brake system) When removing brake disk (3) from rear axle Do not detach brake hose from brake caliper.	AR42.10-P-0080LF
2	Unscrew safety screw (2) and remove brake disk (3)	Replace brake disks (3) in pairs only.
		Bolt, front axle brake disk to wheel hub	*BA42.10-P-1001-06I
		Screw, rear axle brake disk to wheel carrier/wheel hub	*BA42.10-P-1003-06I
3	Install in the reverse order
	Check
4	Check condition of brake disk (3)
			AP42.10-P-4256EW
	Clean
5	Clean contact surface and interference fit of brake disk (3)	Assembly cleaner	*BR00.45-Z-1028-04A
6	Apply thin layer of grease on interference fit of brake disk (3)	:  Only grease the interference fit; there should be no grease between brake disk (3) and wheel hub.
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A