LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> Metris Van Cargo >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brakes -- Hydraulic & Mechanical System (1 Of 3) -- 447 Chassis >> Testing & Repair >> Bleed Brake System - AR42.10-S-0010E

Bleed Brake System - AR42.10-S-0010E

Model 447, 448 

G16482673Courtesy of MERCEDES-BENZ USA
DANGER Risk of death  when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.
Model 447 with engine 780
AS00.00-Z-0035-01A
WARNING Risk of accident  from vehicle starting off by itself when engine running. Risk of injury  (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.
Model 447 with engine 254, 274, 622, 651, 654
Model 448
AS00.00-Z-0005-01A
CAUTION Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A 
Notice  General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment Model 447 with engine 780 AH00.00-Z-0300-01A
Notice  Notes on externally invisible brake fluid loss   AH42.10-P-9406-02A 
Notice  Notes on repairs to brake system   AH42.00-P-0003-01A 
Notice  Brake fluid notes   AH42.50-P-0001-01A 
  Bleeding     
1 Open hood and secure against falling down.    
2 Attach filling unit (1) at brake fluid reservoir (2).    
REFER TO SPECIAL TOOLS 000 588 16 82 00 Filling unit IMPORTANT Observe manufacturer's operating instructions. WS25.00-P-0038B
3 Raise vehicle.   AR00.60-S-1000E
4 Bleed the system.   AR42.10-S-0010-02E 
    TORQUE SPECIFICATION Bleed valve at front axle floating brake caliper *BA42.10-Z-1001-03KOB 
    TORQUE SPECIFICATION Vent valve on rear axle floating brake caliper *BA42.10-Z-1001-12KOJ 
5 Bleed clutch operation system. Model 447 with engine 274, 651, 654 AR25.20-S-0070E
    Model 447 with engine 622 AR25.20-S-0072EF
6 Detach filling unit (1) from brake fluid reservoir (2). IMPORTANT Observe manufacturer's operating instructions.  
INSPECT Check     
7 Check fluid level in brake fluid reservoir (2).    
REFER TO MAINTENANCE   If fluid level is not correct,

correct fluid level.
AP42.50-S-4210E 
8 Check brake system for leaks.   AR42.10-S-0100-01E 
FRONT AXLE FLOATING CALIPER

Number Designation Model 447, 448
BA42.10-Z-1001-03KOB Bleed valve at front axle floating brake caliper Nm 14
REAR AXLE BRAKE CALIPER

Number Designation Model 447, 448
BA42.10-Z-1001-12KOJ Vent valve on rear axle floating brake caliper Nm 14