LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2019 >> Sprinter 3500XD 2D Cab Chassis >> Repair and Diagnosis >> General Information >> OEM General Information >> Body -- General >> Testing & Repair >> Attach Vehicle Identification Number - Ar60.00-D-0800TS

Attach Vehicle Identification Number - Ar60.00-D-0800TS

Model 907 

Shown on model 907 except code 516 (Armenia) 

G13787933
  Product liability, trademark and traffic laws   AH60.00-P-0800-01Z
  Attachment     
1 Install stamping guide IMPORTANT Correct note installation position. AR60.00-D-0800-08TS 
SPECIAL TOOL Stamping guide Fig 1
2 Stamp in vehicle identification number (FIN) in standard field (1) IMPORTANT The sheet metal lug of the crossmember paneling under the windshield is made out of sheet steel. Therefore, to stamp in, carry out short and powerful hammer blows with an appropriately heavy hammer. AR60.00-D-0800-02TS 
SPECIAL TOOL Letter marking punch Fig 5
SPECIAL TOOL Die stamp numbers Fig 4
SPECIAL TOOL Star marking punch Fig 3
SPECIAL TOOL Letter marking punch Fig 2
SPECIAL TOOL Stamping guide Fig 1
INSPECT Check     
3.1 Check whether the FIN was stamped in correctly Model 907
except code 516 (Armenia)
except code 521 (Georgia)
except code 524 (Russia)
except code 526 (Ukraine)
except code 559 (Poland)
except code 583 (Hungary)
except code 771 (Argentina)
except code 775 (Brazil)
except code 795 (Venezuela)
except code 818 (Uzbekistan)
except code 819 (China)
except code 837 (Israel)
If the FIN was not stamped in correctly.

Cross out the FIN and stamp again in the spare field (2).
AR60.00-D-0800-05TS 
IMPORTANT The sheet metal lug of the crossmember paneling under the windshield is made out of sheet steel. Therefore, to stamp in, carry out short and powerful hammer blows with an appropriately heavy hammer.  
SPECIAL TOOL Letter marking punch Fig 5
SPECIAL TOOL Die stamp numbers Fig 4
SPECIAL TOOL Star marking punch Fig 3
SPECIAL TOOL Letter marking punch Fig 2
SPECIAL TOOL Stamping guide Fig 1
3.2 Check whether the FIN was stamped in correctly Model 907 with code 516 (Armenia) or with code 521 (Georgia) or with code 524 (Russia) or with code 526 (Ukraine) or with code 559 (Poland) or with code 583 (Hungary) or with code 771 (Argentina) or with code 775 (Brazil) or with code 795 (Venezuela) or with code 818 (Uzbekistan) or with code 819 (China) or with code 837 (Israel) If the FIN was not stamped in correctly.

Replace crossmember paneling under windshield.
Remove/install crossmember paneling under windshield
AR62.25-D-0027TS
  Remove     
4 Remove stamping guide SPECIAL TOOL Stamping guide Fig 1
Fig 1: Stamping Guide (906 589 10 63 00)
G13787934
Fig 2: Letter Marking Punch (000 589 03 39 00)
G13787935
Fig 3: Star Marking Punch (000 589 02 39 00)
G13787936
Fig 4: Die Stamp Numbers (000 589 01 39 00)
G13787937
Fig 5: Letter Marking Punch (000 589 00 39 00)
G13787938