Cross Out Vehicle Identification Number And RESTAMP In Spare Field - Ar60.00-D-0800-05TS

Model 907

except code 516 (Armenia)

except code 521 (Georgia)

except code 524 (Russia)

except code 526 (Ukraine)

except code 559 (Poland)

except code 583 (Hungary)

except code 771 (Argentina)

except code 775 (Brazil)

except code 795 (Venezuela)

except code 818 (Uzbekistan)

except code 819 (China)

except code 837 (Israel)

Fig 1: Stamping Guide (906 589 10 63 00)

Fig 2: Letter Marking Punch (000 589 03 39 00)

Fig 3: Star Marking Punch (000 589 02 39 00)

Fig 4: Die Stamp Numbers (000 589 01 39 00)

Fig 5: Letter Marking Punch (000 589 00 39 00)

Void incorrect vehicle identification number in stamp field with the "X" letter stamp.
stamping guide must be mounted in standard field.
Attach window plate of stamping guide to reserve field.
Reserve field lies 50 mm to the right of the standard field when viewed in direction of travel.

Observe positioning of window plate of guide.
Stamp in a star with star stamp at far left of window plate of stamping guide.
Ensure correct alignment of star stamp.

The tip of the star stamp must point upward in the stamp field.
Stamp world manufacturer code in reserve field with letter stamp and number stamp at left edge of 1st graduation line of window plate of stamping guide.
Stamp in remaining VIN.
For this purpose, move subsequent characters with letter stamp and number stamp forward on scale by one graduation line. Finally, stamp in a star with star stamp.

The entire width of the VIN is 106 mm (±4 mm).