Pound In Vehicle Identification Number - Ar60.00-D-0800-02TS

Model 907 

Fig 1: Stamping Guide (906 589 10 63 00)

Fig 2: Letter Marking Punch (000 589 03 39 00)

Fig 3: Star Marking Punch (000 589 02 39 00)

Fig 4: Die Stamp Numbers (000 589 01 39 00)

Fig 5: Letter Marking Punch (000 589 00 39 00)

Stamp vehicle identification number in standard field.

Use star stamp at the start and end of the vehicle identification number (FIN).

1. Start stamping process with star stamp at far left.

   Ensure correct alignment of star stamp.

   The tip of the star stamp must point upward in the stamp field.

2. Stamp in world manufacturer code with letter stamp and number stamp at left edge of 1st graduation line of window plate of stamping guide.
3. Stamp in remaining VIN.

   For this purpose, move subsequent characters with letter stamp and number stamp forward on scale by one graduation line. Finally, stamp in a star with star stamp.

   The entire width of the VIN is 106 mm (±4 mm).