Retrofit COMAND APS With DVD Changer - AN82.85-P-0004GQ
Model 166.0##/8## 1#
with code 510 (Audio 20 CD with 6-disc CD changer)
except code 494 (US version)
except code 498 (Japanese version)
except code 523 (Audio 20 CD)
except code 527 (COMAND APS with single DVD drive (with navigation))
except code 830 (China version)
Model 166.0##/8## 1#
with code 523 (Audio 20 CD)
except code 494 (US version)
except code 498 (Japanese version)
except code 510 (Audio 20 CD with 6-disc CD changer)
except code 527 (COMAND APS with single DVD drive (with navigation))
except code 830 (China version)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove | |||
| 1 | Remove side paneling in left side of luggage compartment | ||
| Model 166.8 | AR68.30-P-4800GQX | ||
| MODEL 166.0 | AR68.30-P-4800GQ | ||
| 2 | Remove D-pillar paneling on left | ||
| MODEL 166.0 | AR68.30-P-4495GQ | ||
| Model 166.8 | AR68.30-P-4495GQX | ||
| 3 | Remove cradle for navigation module (A2/30-1) and navigation module from glove compartment | Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) |
|
| 4 | Remove glove compartment | ||
| AR68.10-P-1400GQ | |||
| 5 | Remove radio (A2) | ||
| AR82.60-P-7502GQ | |||
| 6 | Remove 14.7 cm Audio/COMAND display (A40/8) | ||
| Model 166.0/8 up to model year 2016 | AR82.60-P-7722GQ | ||
| Model 166.0/8 as of model year 2016 |
AR82.60-P-7722GQC | ||
| 7 | Remove left cover below instrument panel | ||
| AR68.10-P-1500GQ | |||
| 8 | Detach left front seat from frame floor assembly and move towards the rear with the lines attached | ||
| AR91.10-P-1000GQ | |||
| 9 | Remove multifunction antenna or multifunction antenna mockup | ||
| Model 166.0##/8## 1# with code 228 (Auxiliary heater) with code 348 (Emergency call/assistant system) with code 359 (TELE AID emergency call system) with code 386 (Comfort telephony) with code 510 (Audio 20 CD with 6-disc CD changer) with code 511 (Audio 50 APS with DVD changer) with code 512 (COMAND APS with DVD changer) with code 525 (MB Audio 50 APS radio) with code 536 (SIRIUS satellite radio) except code 494 (US version) except code 498 (Japanese version) except code 523 (Audio 20 CD) except code 527 (COMAND APS with single DVD drive (with navigation)) except code 830 (China version) except code Z04 (Light armoring) except code Z05 (B5 armoring on special protection version) Model 166.0##/8## 1# with code 228 (Auxiliary heater) with code 348 (Emergency call/assistant system) with code 359 (TELE AID emergency call system) with code 386 (Comfort telephony) with code 511 (Audio 50 APS with DVD changer) with code 512 (COMAND APS with DVD changer) with code 523 (Audio 20 CD) with code 525 (MB Audio 50 APS radio) with code 536 (SIRIUS satellite radio) except code 494 (US version) except code 498 (Japanese version) except code 510 (Audio 20 CD with 6-disc CD changer) except code 527 (COMAND APS with single DVD drive (with navigation)) except code 830 (China version) except code Z04 (Light armoring) except code Z05 (B5 armoring on special protection version) |
AR82.70-P-8951GQ | ||
| Install | |||
| 10 | Install new multifunction antenna | ||
| Model 166.0##/8## 1# with code 228 (Auxiliary heater) with code 348 (Emergency call/assistant system) with code 359 (TELE AID emergency call system) with code 386 (Comfort telephony) with code 510 (Audio 20 CD with 6-disc CD changer) with code 511 (Audio 50 APS with DVD changer) with code 512 (COMAND APS with DVD changer) with code 525 (MB Audio 50 APS radio) with code 536 (SIRIUS satellite radio) except code 494 (US version) except code 498 (Japanese version) except code 523 (Audio 20 CD) except code 527 (COMAND APS with single DVD drive (with navigation)) except code 830 (China version) except code Z04 (Light armoring) except code Z05 (B5 armoring on special protection version) Model 166.0##/8## 1# with code 228 (Auxiliary heater) with code 348 (Emergency call/assistant system) with code 359 (TELE AID emergency call system) with code 386 (Comfort telephony) with code 511 (Audio 50 APS with DVD changer) with code 512 (COMAND APS with DVD changer) with code 523 (Audio 20 CD) with code 525 (MB Audio 50 APS radio) with code 536 (SIRIUS satellite radio) except code 494 (US version) except code 498 (Japanese version) except code 510 (Audio 20 CD with 6-disc CD changer) except code 527 (COMAND APS with single DVD drive (with navigation)) except code 830 (China version) except code Z04 (Light armoring) except code Z05 (B5 armoring on special protection version) |
AR82.70-P-8951GQ | ||
| 11 | Retrofit global positioning system (GPS) antenna line | Vehicles without CODE 508 (Navigation box preinstallation) or without CODE 509 (Navigation box) | AN82.61-P-7474-01GQX |
| 12 | Route GPS antenna line, which was connected to the cradle for the navigation module (A2/30-1) at the antenna lines slot (C) (arrows), into the slot for the COMAND controller unit (A40/3) | Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) | |
| 13 | Disassemble 2-pin connector of antenna lines | Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) | |
| 14 | Strap down Traffic Message Channel (TMC) antenna line together with the remaining wiring harnesses of the cradle for the navigation module (A2/30-1) | Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) | |
| 15 | Seal openings in glove compartment | Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) | |
| 16 | Retrofit electrical wiring harness of COMAND fan motor | AN82.85-P-0005-02GQX | |
| 17 | Install COMAND fan motor | AN82.85-P-0005-01GQX | |
| 18 | Install new COMAND controller unit (A40/3) incl. DVD changer | ||
| AR82.60-P-7502GQ | |||
| 19.1 | Connect GPS antenna line, which was connected at the cradle for the navigation module (A2/30-1) (arrow) to the COMAND controller unit (A40/3) | Vehicles with CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) | |
| 19.2 | Connect white 1-pin connector of retrofitted GPS antenna line to COMAND controller unit (A40/3) | Vehicles without CODE 508 (Navigation box preinstallation) or without CODE 509 (Navigation box) | |
| 20 | Install 17.8 cm Audio/COMAND display (A40/8) | ||
| Model 166.0/8 up to model year 2016 | AR82.60-P-7722GQ | ||
| Model 166.0/8 as of model year 2016 | AR82.60-P-7722GQC | ||
| 21 | Install remaining parts | ||
| 22 | Connect diagnostic system and select vehicle | ||
| AD00.00-P-2000-04A | |||
| 23 | Delete code 510 (Audio 20 CD with 6-disk CD changer) or code 523 (Audio 20 CD) and, where applicable, code 508 (Navigation box preinstallation) or code 509 (Navigation box) via the Vehicle Documentation (VeDoc) in online vehicle data card | AN00.01-P-1001-01CW | |
| 24 | Add code 512 (COMAND APS with DVD changer) via the Vehicle Documentation (VeDoc) in online vehicle data card | AN00.01-P-1001-01CW | |
| 25 | Document retrofitted equipment through VeDoc | ||
| 26 | For the instrument cluster, perform a variant coding with XENTRY using the software calibration number (SCN) | ||
| AR54.21-P-0015X | |||
| 27 | For the COMAND controller unit (A40/3) (with navigation), perform a variant coding with XENTRY using the software calibration number (SCN) | ||
| AR54.21-P-0015X | |||
| 28 | Disconnect diagnostic system | ||
| AD00.00-P-2000-04A | |||
| 29 | Perform function test |
PARTS ORDERING NOTE
| Part no. | Designation | Quantity |
|---|---|---|
| KG 99 (see EPC) | Scope of delivery for COMAND APS with DVD changer | 1 |