Remove/install stabilizer bar at front axle - AR32.35-P-2200LW

MODEL 205, 213 

except code M005 (4MATIC) 

Fig 1: Stabilizer Bar At Front Axle Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove/install
1	Lower front axle	Model 213 except code M005 (4MATIC)	AR33.10-P-0101LWE
		Model 205 except code M005 (4MATIC)	AR33.10-P-0101LW
2	Detach stabilizer bar link rods (2) from stabilizer bar (1)		AR32.35-P-3328LW
3	Unscrew screws/bolts (3), take off mounting bar (4) and remove stabilizer bar (1) to the side	Bolt, torsion bar to longitudinal member	*BA32.20-P-1001-02R
4	Install in the reverse order
5	Perform wheel alignment check		AR40.20-P-0200LW

FRONT AXLE TORSION BAR

Number	Designation		Model 205 except 4MATIC	Model 213 except 4MATIC
BA32.20-P-1001-02R	Bolt, torsion bar to longitudinal member	Nm	70	70