Perform wheel alignment check - AR40.20-P-0200LW
MODEL 205
MODEL 213
MODEL 253
MODIFICATION NOTES
| 06.11.2017 | The camber and caster on front axle in AMG vehicles are not adjustable. | Operation step 9 and 12 |
| Measure | |||
| 1 | Prepare vehicle for wheel alignment check | AR40.20-P-0260SX | |
| 2 | Switch off easy entry/exit | Model 205, 253 with code 275 (Driver's seat, electrically adjustable with memory function) Model 213 with code 275 (Memory package) |
|
| 3 | Lower window of driver door | ||
| 4 | Using the adapter, install the brake pedal retaining tool between the pedal and the driver seat | Otherwise, the brake pedal and driver's seat may be damaged. The vehicle must not be loaded again during the remaining work procedure. |
|
| Fig 1 | |||
| Fig 2 | |||
| 5 | Check vehicle level at front and rear axles using electronic inclinometer | AR40.20-P-0301LW | |
| 6 | Attach Mercedes-Benz quick-clamp holders | AR40.20-P-0230SX | |
| 7 | Fit on measuring heads | ||
| 8 | Perform initial measurement | ||
| 9 | Compare determined values against specified values | Assign suspension data Model 213 | AR40.20-P-0203LWA |
| Assign suspension data Model 253 | AR40.20-P-0203LWB | ||
| Assign suspension data Model 205 Model 205.064/086/087/264/286/287/364/386/387/464 /486/487, 213.064/088/089/264/288/289, 253.364/388/389/964/988/989 The camber and caster on the front axle are not adjustable. Model 205 (except 205.386/387/486/487) Model 213 (except 213.088/089/288/289) Model 253 (except 253.388/389/988/989) The camber on the rear axle is not adjustable. The toe-out angle cannot be adjusted. |
AR40.20-P-0203LWC | ||
| 10 | Adjust camber at rear axle | Model 205.386/387/486/487, 213.088/089/288/289, 253.388/389/988/989 According to results of initial measurement. | |
| Model 205.386/387/486/487 | AR40.20-P-0202LWI | ||
| Model 213.088/089/288/289 | AR40.20-P-0202MNE | ||
| Model 253.388/389/988/989 | AR40.20-P-0202LWX | ||
| 11 | Adjust rear-axle toe | According to results of initial measurement. | AR40.20-P-0261LW |
| 12 | Adjust camber and caster at the front axle | According to results of initial measurement. Model 205 (except 205.064/086/087/264/286/287/364/386/387/464 /486/487) Model 213 (except 213.064/088/089/264/288/289) Model 253 (except 253.364/388/389/964/988/989) |
AR40.20-P-0263LW |
| 13 | Adjust front axle toe | According to results of initial measurement. | AR40.20-P-0264LW |
| 14 | Perform final measurement | ||
| 15 | Detach measuring heads | ||
| 16 | Detach Mercedes-Benz quick-clamping holders | ||
| 17 | Remove brake pedal jack tool with its adapter | ||
| 18 | Lock turntables and sliding platforms | ||
| 19 | Drive vehicle off measuring system | ||
| 20 | Switch on easy entry and exit feature | Model 205, 253 with code 275 (Driver's seat, electrically adjustable with memory function) Model 213 with code 275 (Memory package) |
|
| 21 | Check/correct headlamp adjustment | Model 205, 253 | AP82.10-P-8260E |
| Model 213 | AP82.10-P-8260J |