LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> Sprinter 3500 Van Cargo Extended, RWD >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brakes -- 906 Chassis >> Testing & Repair >> Bleed Brake System - Ar42.10-D-0010H

Bleed Brake System - Ar42.10-D-0010H

Model 906 

Checking procedure 

G10887491Courtesy of MERCEDES-BENZ USA
  Bleeding     
CAUTION Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A 
  Notes on externally invisible brake fluid loss   AH42.10-P-9406-02A 
  Notes on repairs to brake system   AH42.00-P-0003-01A 
  Brake fluid notes   AH42.50-P-0001-01A 
1 Connect bleeder unit (5) IMPORTANT Follow the operating instructions from the manufacturer and observe the ventilation pressure.  
2 Raise vehicle   AR00.60-D-1000H
3 Carrying out bleeding operation   AR42.10-D-0010-02H 
TORQUE SPECIFICATION Bleed screw to brake caliper *BA42.10-N-1002-10H 
TORQUE SPECIFICATION Bleed screw to brake caliper *BA42.10-N-1003-12A 
4 Lower vehicle   AR00.60-D-1000H
5 Disconnect bleeder unit (5)    
INSPECT Check     
6 Check fluid level in reservoir; correct if necessary    
REFER1/2TO1/2MAINTENANCE     AP42.50-D-4210H 
7 Check brake system for leaks   AR42.10-S-0100-01S 
FRONT AXLE BRAKE CALIPER

Number Designation Model 906
BA42.10-N-1002-10H Bleed screw to brake caliper M10X1 Nm 14
REAR AXLE BRAKE CALIPER

Number Designation Model 906
BA42.10-N-1003-12A Bleed screw to brake caliper M10X1 Nm 14