Carrying Out Bleeding Operation - Ar42.10-D-0010-02H
FRONT AXLE BRAKE CALIPER
| Number | Designation | Model 906 | ||
|---|---|---|---|---|
| BA42.10-N-1002-10H | Bleed screw to brake caliper | M10X1 | Nm | 14 |
REAR AXLE BRAKE CALIPER
| Number | Designation | Model 906 | ||
|---|---|---|---|---|
| BA42.10-N-1003-12A | Bleed screw to brake caliper | M10X1 | Nm | 14 |
- Open right rear bleed valve (1).
If the brake fluid that flows out is free of bubbles, close the right rear bleed valve (1) and use a
torque wrench to apply the specified tightening torque.
- Open left front bleed valve (2).
If the brake fluid that flows out is free of bubbles, close the left front bleed valve (2) and use a
- Open left rear bleed valve (3).
If the brake fluid that flows out is free of bubbles, close the left rear bleed valve (3) and use a
- Open right front bleed valve (4).
If the brake fluid that flows out is free of bubbles, close the right front bleed valve (4) and use a