Wiring Diagram For Transfer Case Control Unit - Pe28.19-D-2101AA
Model 906.1/2/6/7 up to 6/30/13 with engine 272, 642, 646 with code ZG1 (Engageable all-wheel drive) with code ZG3 (Engageable all-wheel drive with gear reduction) with code ZG4 (Permanent all-wheel drive with gear reduction) except code ZU7 (National version for Canada) except code ZU8 (National version for USA)
| Wiring diagram for transfer case control unit | PE28.19-D-2101-97AA |
| Location and assignment of line and plug connectors | GF00.19-D-1000AA |
| Location and assignment of ground points | GF00.19-D-2000AA |
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-D-3000AA |
| Fuse and relay box, location/assignment | GF54.15-D-0900AA |
| Use of wiring diagrams | OV00.01-D-1901-03AA |
| Search aid for all electrical components | OV00.01-D-1909AA |