Mobile phone system, function - GF82.70-P-0007GQJ
MODEL 164.1 with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (498) Japan version as of model year 2009 up to model year 2011/Modification Year 2008 model refinement package,/Modification Year 2010, basic telephony
MODEL 164.8 with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (498) Japan version as of model year 2009 up to model year 2011/Modification Year 2008,/Modification Year 2010, basic telephony
MODEL 251.0 with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (498) Japan version as of model year 2009 up to model year 2011/Modification Year 2008,/Modification Year 2010 model refinement package, basic telephony
MODEL 251.1 with CODE (527) COMAND APS with single DVD drive (with navigation) with CODE (498) Japan version as of model year 2009 up to model year 2011/Modification Year 2008,/Modification Year 2010 model refinement package, basic telephony
Function requirements
- Status "circuit 30 ON"
- One mobile phone network is available in sufficient strength and quality
- Mobile phone adapter cable connected via cell phone separation point (X39/37) to communications control unit (N123/6)
- Compatible mobile phone connected to preinstalled adapter cable or Bluetooth-compatible mobile phone in vehicle and authorized at the COMAND operating, display and controller unit (A40/3)
Various mobile phones can be connected to the communications control unit over the cell phone separation point using the preinstalled adapter cable.
A Bluetooth-compatible mobile phone can only operated in the vehicle when a mobile phone is not connected to the cell phone separation point or the adapter cable.
In order to be able to operate a Bluetooth-compatible mobile phone authorized at the COMAND operating, display and controller unit in the vehicle, the mobile phone must support the handsfree profile (HFP) 1.0 or 1.5. More information is available under:
General
The mobile phone system allows mobile phones operating with the Personal Digital Cellular (PDC), Code Division Multiple Access (CDMA), Wideband Code Division Multiple Access (WCDMA) and Freedom of Mobile Multimedia Access (FOMA) networks to be operated in the vehicle. The mobile phone system consists of the following subfunctions, which are described in separate service information:
- Switching on and off characteristics
- Establishing call and terminating call
- Accepting calls, rejecting calls and toggling
- Voice control system
The mobile phone system includes the following subfunctions:
- Address book
- "Private Mode"
- "Seamless Switch"
- Toggling
The system is described using a mobile phone connected to the cell phone separation point and the mobile phone adapter cable as an example. Deviations from this are indicated with the symbol.
Address book
The user can manage all the contact data in the address book (view, edit, add, delete and create). The address book contains the address entries stored in the COMAND operating, display and controller unit. In addition, data (names, vCards and standard numbers) can be loaded from the telephone book in the mobile phone into the address book in the COMAND operating, display and controller unit.
The data from the mobile phone telephone book is then permanently available.
Address entries can only be removed by deleting individual entries or by deleting the entire address book.
The Bluetooth interface of the mobile phone and the Bluetooth antenna (A2/91) can be used to transmit data from other external devices (e.g. PDA, laptop, etc.) into the address book. In addition, vCards can be transferred to the address book from an SD card using the SD slot in the COMAND operating, display and controller unit. These data are then permanently available as address entries. Address-relevant mobile phone system applications can be directly started and supplied with the stored data via address book entries. Address entries can contain the following:
- Names (surname and first name)
- Postal addresses (private or business)
- Telephone numbers (private, business, fixed line network, mobile or car)
- Company name
- Geo position (private or business)
- Notes
150 entries can be provided with voice commands (voice tags) for the voice control system (VCS). The address entries stored in the address book in the COMAND operating, display and controller unit and the data loaded from the mobile phone are displayed.
With a mobile phone operated with Bluetooth, read access to the telephone book in the mobile phone is possible when the mobile phone supports the Bluetooth Profile Phonebook Access Profile (PBAP).
"Private Mode"
When in "Private mode", the user can make a telephone call without other vehicle occupants being able to hear the conversation. This is possible by separating the mobile phone from the adapter cable during a telephone call in the handsfree mode and therefore separating it from the communications control unit.
With a mobile phone operated with Bluetooth, the phone call is completed in "Private mode" if the mobile phone supports "Private mode" and "Private mode" is activated.
"Seamless Switch"
"Seamless switch" means either that an existing call on the mobile phone is not terminated when the phone is disconnected from the adapter cable or that an existing call is forwarded to the COMAND operating, display and controller unit when the mobile phone is connected to the adapter cable.
Toggling
The user can switch back and forth between telephone calls with 2 people. While the user talks to one person on the line, the connection to the other is put on hold. However, voice transmission is interrupted.
| Mobile phone system, location of components | GF82.70-P-0007-01GQJ | ||
| Mobile phone system, block diagram | GF82.70-P-0007-02GQJ | ||
| Telephone switch-on/switch-off characteristics, function | GF82.70-P-2007GQJ | ||
| Setting up/ending phone call, function | GF82.70-P-2008GQJ | ||
| Mobile phone system, accepting calls, rejecting calls and toggling, function | GF82.70-P-2017GQJ | ||
| Voice control, function | GF82.70-P-3020GQJ |