Symbol and ambiance illumination, function - GF82.20-P-2100GM
MODEL 164.1 as of model year 2009/YoM 08 model refinement package
MODEL 164.8, 251.0/1 as of model year 2009/YoM 08
Function requirements for symbol and ambiance illumination, general
- No overvoltage or undervoltage (operating voltage range U ≥ 7 ≤ 17.5 V)
Symbol and ambiance illumination in general
The symbol and ambiance illumination feature provides the brightness-adjustable illumination of all controls as well as the illumination of the vehicle interior.
The symbol and ambiance illumination feature consists of the following subfunctions:
- Function sequence for search and symbol illumination
- Function sequence, ambiance illumination (Model 164.8 as of 1.7.09 with code (877) Ambiance illumination and model 164.1 as of 1.8.10 with code (877) Ambiance illumination)
Additional function requirements, search and symbol illumination
- Standing lights on, circuit 58
Function sequence for search and symbol illumination
The following information is read in and evaluated by the instrument cluster (A1) for controlling the search and symbol illumination:
- Status of standing lights actuation, provided by front SAM control unit (N10)
- Status of instrument and switch and controls illumination button, bright (A1s4)
- Status of instrument and switch and controls illumination button, dark (A1s5)
If the "ambient illumination" function has been activated via the instrument cluster, it automatically switches itself on when the vehicle is unlocked using the transmitter key (A8/1). This causes "Standing lights actuation active" status to be set, which also activates the search and symbol illumination.
If the driver door is then opened, the ambient illumination function goes off. "Standing lights actuation active" status is canceled, and the instrument cluster deactivates the search and symbol illumination. The controls in the vehicle are not illuminated again until the transmitter key in the EZS control unit (N73) is moved to the radio position (circuit 15R On).
The instrument cluster uses the incoming data to generate the circuit 58d signal and transmits it via the interior CAN (CAN B) to the following control units:
- Radio (A2) (with code (510) Audio 20 with CD changer or with code (523) MB Audio 20 radio)
- Radio and navigation unit (A2/56) (with code (511) Audio 50 APS with DVD changer or code (525) MB Audio 50 APS radio)
- COMMAND operating, display and controller unit (A40/3) (with code (512) COMMAND APS with DVD changer or code (527) COMMAND APS with single DVD drive (with navigation) or code (528) COMMAND incl. DVD changer)
- DVD player (A40/4) (with code (864) Rear entertainment system or code (866) Rear entertainment preinstallation and code (494) USA version)
- Front SAM control unit
- Rear SAM control unit (N10/8)
- AAC [KLA] control and operating unit (N22) (without code (581) Comfort automatic air conditioning)
- Comfort AAC control and operating unit (N22/7) (with code (581) Comfort automatic air conditioning)
- Folding rear bench seat control unit (N32/26) (model 164.1 with code (845) 3rd seat row folding down electrically)
- Left front door control unit (N69/1)
- Right front door control unit (N69/2)
- Overhead control panel control unit (N70)
- Lower control panel control unit (N72) (model 164.1 with code (430) Off-road package and model 164.8)
- Upper control panel control unit (N72/1)
- RCP [HBF] control unit (N72/2)
The control units read in the circuit 58d signal and actuate the search and symbol illumination of the connected or integrated controls.
The instrument cluster also transmits the circuit 58d signal to the following control unit via the engine compartment CAN (CAN C):
- Steering column tube module (N80)
The DVD player (with code (864) Rear entertainment system or code (866) Rear entertainment preinstallation and code (494) USA version) makes the circuit 58d signal available to the following components on the telematics CAN:
- Left rear display (A40/5)
- Right rear display (A40/6)
The overhead control panel control unit actuates the ambient lamp (A67e3) in the inside rearview mirror unit (A67) and transmits the request for switching on the footwell illumination via the interior CAN to the front SAM control unit.
The search and symbol illumination of the switches located on the overhead control panel control unit is switched on when a vehicle door is opened even without reception of a circuit 58d signal with a brightness value that corresponds to 100 %.
If the status of the vehicle doors subsequently does not change, the search and symbol illumination is switched off after t = 30 s. The opening or closing of a vehicle door during the time interval triggers a restart.
The front SAM control unit actuates the following components:
- Illumination (R3e1) of cigar lighter with front ashtray illumination (R3) (with code (301) Ashtray package/smoker package)
- Left rear power window switch (S21/3) (search and symbol illumination)
- Right rear power window switch (S21/4) (search and symbol illumination)
- Footwell illumination:
- Right front footwell lamp (E17/15)
- Left front footwell lamp (E17/16)
- Right rear footwell lamp (E17/17) (with code (876) Interior lights package)
- Left rear footwell lamp (E17/18) (with code (876) Interior lights package)
The footwell lamps are actuated with a fixed brightness value when the central locking (CL [ZV]) is unlocked and the status of circuit 15R is On.
This is defined via the software calibration number (SCN) coding.
When a vehicle door is opened or the interior lights switch, 1st seat row (N70s4) or the rear dome lamps switch (N70s2) is operated, the footwell lamps are actuated with a brightness value that corresponds to 100 %.
The status of circuit 15 and the status of the central locking system are transmitted by the EZS control unit and the status of the vehicle doors is transmitted by the rear SAM control unit (N10/8) via the interior CAN to the front SAM control unit.
The front SAM control unit also actuates the following components in vehicles with code (876) Interior lights package:
- Left center air outlet illumination (E10/1)
- Left air outlet illumination (E10/2)
- Right air outlet illumination (E10/3)
- Right center air outlet illumination (E10/4)
- Front center console cup holder illumination (E20/2)
- 2nd seat row cup holder illumination (E20/14) (model 251)
- Front armrest folding compartment illumination (E36/1) (model 251.0/1)
- Front center console illumination (E36/2) (model 164)
- Rear center console illumination (E36/3) (model 251)
- Rear center console illumination 2 (E36/6) (model 251 with code (847) 3rd seat row)
The left front door control unit actuates the following components:
- Left front door inside handle illumination (E17/11) (with code (876) Interior lights package)
- Rear-end door open and close switch, driver side (S15/3) (with code 890) EASY-PACK liftgate)
- Driver power window and outside mirror adjustment switch group (S20/1)
- Left interior CL [ZV] switch (S85/5)
The right front door control unit actuates the following components:
- Right front door inside handle illumination (E17/12) (with code (876) Interior lights package)
- Front passenger power window switch (S21/2)
- Right interior CL switch (S85/6)
The rear SAM control unit actuates the following components in vehicles with code (876) Interior lights package:
- Left rear door inside handle illumination (E17/13)
- Right rear door inside handle illumination (E17/14)
In vehicles with code (847) 3rd seat row and code (876) Interior lights package, the overhead control panel control unit actuates the search and symbol illumination of the operating switches integrated in the 3rd seat row dome lamp (E15/3).
With model 164.8 with code (845) 3rd seat row folding down electrically, the folding rear bench seat control unit actuates the search and symbol illumination of the following components:
- Front switch for left folding backrest (S158/1)
- Rear switch for left folding backrest (S158/2)
- Front switch for right folding backrest (S158/3)
- Rear switch for right folding backrest (S158/4)
The steering column tube module actuates the search and symbol illumination of the following components:
- DIRECT SELECT gear selector switch (S16/13)
- Left multifunction steering wheel button group (S110)
- Right multifunction steering wheel button group (S111)
The upper control panel control unit actuates the search and symbol illumination of the rotary light switch (S1).
The search and symbol illumination is switched off immediately when the vehicle is locked. Actuation of the search and symbol illumination of operating units in accordance with the status of the rain/light sensor (B38/2) only takes place with circuit 15R On. For circuit 15 OFF the search and symbol illumination is actuated corresponding to the daytime brightness level. The rain/light sensor data is read in by the overhead control panel control unit and made available on the interior CAN.
Additional function requirements, ambiance illumination (Model 164.8 as of 1.7.09 with code (877) Ambiance illumination and model 164.1 as of 1.8.10 with code (877) Ambiance illumination)
- Circuit 15 ON
- Rain/light sensor signals "Darkness detected"
- Brightness of ambiance illumination set
Function sequence for ambiance illumination (Model 164.8 as of 1.7.09 with code (877) Ambiance illumination and model 164.1 as of 1.8.10 with code (877) Ambiance illumination)
The ambiance illumination encompasses the actuation of different components for diffuse illumination of the instrument panel and vehicle doors.
The intensity of the ambiance illumination can be adjusted in five stages using the "Settings" operation level in the instrument cluster.
The following information is made available to the rear SAM control unit on the interior CAN for controlling the ambiance illumination:
- Rain/light sensor data by the overhead control panel control unit
- Circuit 15 status by the EZS control unit
- Ambiance illumination brightness by the instrument cluster
The rear SAM control unit reads in the appropriate information, evaluates it and actuates the following components:
- Driver instrument panel ambiance illumination (E43/7)
- Front passenger instrument panel ambiance illumination (E43/8)
- Left front door ambiance illumination (E17/43)
- Right front door ambiance illumination (E17/44)
- Left rear door ambiance illumination (E17/45)
- Right rear door ambiance illumination (E17/46)
| Search and symbol illumination electrical function schematic | Model 164 | PE82.20-P-2054-97MAA | |
| Model 251 | PE82.20-P-2054-97RAA | ||
| Electrical function schematic ambiance illumination | Model 164.8 as of 1.7.09 with code (877) Ambiance illumination and model 164.1 as of 1.8.10 with code (877) Ambiance illumination | PE82.20-P-2053-97MAA | |
| Component description for instrument cluster | A1 Model 251, model 164 (except 164.195) |
GF54.30-P-6000GM | |
| Model 164.195 * for USA only |
GF54.30-P-6000GQH | ||
| Radio control panel, component description | A2 With code (510) Audio 20 with CD changer |
GF82.60-P-3116GQA | |
| With code (523) MB Audio 20 radio | GF82.60-P-3116GQ | ||
| Radio/navigation unit, component description | A2/56 With code (511) Audio 50 APS with DVD changer |
GF82.61-P-4111GQA | |
| With code (525) MB Audio 50 APS radio | GF82.61-P-4111GQ | ||
| Component description for COMMAND operating, display and controller unit | A40/3 With code (527) COMMAND APS with single DVD drive (with navigation) and code (498) Japan version |
GF82.85-P-3134GQJ | |
| With code (512) COMMAND APS with DVD changer or Code (527) COMMAND APS with single DVD drive (with navigation) and without code (498) Japan version or code (528) COMMAND incl. DVD changer, without navigation | GF82.85-P-3134GQ | ||
| Component description for rear entertainment DVD player | A40/4 With code (864) Rear Entertainment System or with code (866) Rear entertainment preinstallation and code (494) USA version |
GF82.90-P-4009GQ | |
| Component description for rear display left/right | A40/5, A40/6 With code (864) Rear Entertainment System or with code (866) Rear entertainment preinstallation and code (494) USA version |
GF82.90-P-4020GQ | |
| Component description for front SAM control unit | N10 | GF54.21-P-7010GM | |
| Component description for rear SAM control unit | N10/8 | GF54.21-P-7030GM | |
| Component description for automatic air conditioning control and operating unit | N22 Without code (581) Comfort automatic air conditioning |
GF83.40-P-3000GM | |
| Component description for comfort automatic air conditioning control and operating unit | N22/7 With code (581) Comfort automatic air conditioning |
GF83.40-P-3010GM | |
| Folding rear bench seat control unit, component description | N32/26 Model 164.8 with code (845) 3rd seat row folding down electrically |
GF91.29-P-5251GM | |
| Component description for left front door control unit | N69/1 | GF72.29-P-4141GM | |
| Component description for right front door control unit | N69/2 | GF72.29-P-4142GM | |
| Component description for overhead control panel control unit | N70 | GF82.20-P-5216GM | |
| Lower control panel control unit, component description | N72 Model 164.8, Model 164.1 with code (430) Offroad package |
GF54.21-P-6060GM | |
| Upper control panel control unit, component description | N72/1 | GF54.21-P-6040GM | |
| Component description for rear control panel control unit | N72/2 Without code (581) Comfort automatic air conditioning |
GF83.40-P-3020GMA | |
| With code (581) Comfort automatic air conditioning | GF83.40-P-3020GMB | ||
| EZS control unit, component description | N73 Model 251, model 164 (except 164.195) |
GF80.57-P-6003GM | |
| Model 164.195 * for USA only |
GF80.57-P-6003GQH | ||
| Component description for steering column tube module control unit | N80 | GF54.21-P-6051GM | |
| Inside rearview mirror unit, component description | A67 | GF68.49-P-2105GM |