Wiring diagram for engine CAN bus - PE00.19-P-2200MAB
MODEL 164.1 with ENGINE 156, 272, 273, 629, 642 as of model year 2010/YoM 09 Potential distributor X30/19 and X30/46
MODEL 164.8 with ENGINE 273, 629, 642 as of model year 2010/YoM 09 model refinement package Potential distributor X30/19 and X30/46
| Wiring diagram for engine CAN bus | PE00.19-P-2200-97MAB | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Use of wiring diagrams | OV00.01-P-1901-03MAA | ||
| Search aid for all wiring diagram groups | MODEL 164 Circuit diagrams |
OV00.01-P-1901MAA | |
| Abbreviations for wiring diagrams | OV00.01-P-1001-27A | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28MAA | ||
| Location and assignment of line and plug connectors | GF00.19-P-1000MAA | ||
| Location and assignment of ground points | GF00.19-P-2000MAA | ||
| Location and assignment of Z connector sleeves (line connectors in wiring harness) | GF00.19-P-3000MAA | ||
| Overview of wiring diagrams covering multiple function groups | Further wiring diagrams | PE00.19-P-1100MAA | |
| Overview of wiring diagrams for mixture formation | Further wiring diagrams | PE07.00-P-1100MAA | |
| Overview of wiring diagrams for electrical system, equipment and instruments | Further wiring diagrams | PE54.00-P-1100MAA | |
| Fuse and relay box, as-built configuration | MODEL 164.1 (except 164.195) as of model year 09/YoM 08 model refinement package MODEL 164.8 as of model year 09/AEJ 08 |
GF54.15-P-0800GM | |
| Repair wiring harness as per specified repair method | The original wire color is visible again after the repair line (length about 30 cm). |
AR00.19-P-0001A |