Rear Wall & Rear End -- E550 (211.072)

• General Information
  • General notes: Passenger cars: Rear wall and rear end - AH64.00-Z-9999AZ
• Testing & Repair
  • Testing and repair work: Passenger cars: Rear wall and rear end - AR64.00-Z-9211AA
  • Separate rear wall - AR64.10-P-5746-01T
  • Prepare rear wall for installation - AR64.10-P-5746-02T
  • Install rear wall - AR64.10-P-5746-03T
  • Cut off rear end center assembly - AR64.20-P-1000-02T
  • Preparing bottom rear center section for installation - AR64.20-P-1000-07T
  • Install and weld in bottom rear center section - AR64.20-P-1000-08T
  • Replace complete bottom rear center section - AR64.20-P-1000T
  • Prepare new parts - AR64.20-P-1060-02T
  • Install cross member and weld in - AR64.20-P-1060-03T
  • Replace bottom rear end center assembly together with rear cross member - AR64.20-P-1060T
  • Remove/install rear wall between interior and trunk - AR64.20-P-1090T
  • Remove rear crossmember - AR64.20-P-1100-01T
  • Install longitudinal member connection element and rear cross member and weld in - AR64.20-P-1200-03T
  • Install longitudinal member end element and weld in - AR64.20-P-1200-05T
  • Separate deformed rear area - AR64.20-P-1200-11T
  • Prepare longitudinal member connection element for installation - AR64.20-P-1200-20T
  • Left side rear damage - AR64.20-P-1200T
• Torque Specifications
  • Tightening torques: Passenger cars: Rear wall and rear end - BA64.00-Z-9999AZ
  • Rear - BA64.20-P-1000-01A
• Special tools
  • 201 589 00 27 00 Cross-brace - WS64.00-P-0012K
  • 211 589 01 27 00 Pulling device - WS64.00-P-0110K
  • 211 589 07 23 00 Template - WS64.00-P-0111K
  • 211 589 08 23 00 Template - WS64.00-P-0112K
  • 164 589 00 39 00 Embossing tool - WS64.00-P-0115K
  • Special tools: Passenger cars: Rear wall and rear end - WS64.00-Z-9999AZ