Automatic loading floor, function - GF68.80-P-0001TA

MODEL 211.2 with CODE (943) Automatically extendable main loading floor 

The automatic loading floor  facilitates loading the rear compartment. For this purpose the automatic loading floor  can be retracted or extended hydraulically. The automatic loading floor  is operated via the loading floor switch (S150)  located on the end of the tailgate.

The status of the loading floor switch (S150)  is transmitted to the loading floor control module (n130) by the tailgate control module (N111)  via the CAN interior compartment bus

The current status of the automatic loading floor  is determined by loading floor On limit switch (S150/1)  and loading floor OFF limit switch (S150/2)  and transmitted to the loading floor control module (N130) 

The loading floor control module (N130)  supplies the loading floor hydraulic pump (M69)  with power.

Special case with automatic tailgate, code 890 

If the vehicle is equipped with an automatic tailgate, code 890  the status of the automatic loading floor influences the behavior of the automatic tailgate closing system.