Rear Wall & Rear End
- General Information
- Testing & Repair
- Testing and repair work: Passenger cars: Rear wall and rear end - AR64.00-Z-9211AA
- Separate rear wall - AR64.10-P-5746-01T
- Prepare rear wall for installation - AR64.10-P-5746-02T
- Install rear wall - AR64.10-P-5746-03T
- Cut off rear end center assembly - AR64.20-P-1000-02T
- Preparing bottom rear center section for installation - AR64.20-P-1000-07T
- Install and weld in bottom rear center section - AR64.20-P-1000-08T
- Replace complete bottom rear center section - AR64.20-P-1000T
- Prepare new parts - AR64.20-P-1060-02T
- Install cross member and weld in - AR64.20-P-1060-03T
- Replace bottom rear end center assembly together with rear cross member - AR64.20-P-1060T
- Remove/install rear wall between interior and trunk - AR64.20-P-1090T
- Remove rear crossmember - AR64.20-P-1100-01T
- Install longitudinal member connection element and rear cross member and weld in - AR64.20-P-1200-03T
- Install longitudinal member end element and weld in - AR64.20-P-1200-05T
- Separate deformed rear area - AR64.20-P-1200-11T
- Prepare longitudinal member connection element for installation - AR64.20-P-1200-20T
- Left side rear damage - AR64.20-P-1200T
- Torque Specifications
- Special Tools
- 201 589 00 27 00 Cross-brace - WS64.00-P-0012K
- 211 589 01 27 00 Pulling device - WS64.00-P-0110K
- 211 589 07 23 00 Template - WS64.00-P-0111K
- 211 589 08 23 00 Template - WS64.00-P-0112K
- 164 589 00 39 00 Embossing tool - WS64.00-P-0115K
- Special tools: Passenger cars: Rear wall and rear end - WS64.00-Z-9999AZ