Test and adjustment values: Passenger cars: Complete engine, crankcase ventilation, cylinder head, crankcase - BE01.00-Z-9999AZ
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mercedes-Benz ML350, 2010 Mercedes-Benz ML350, 2009 Mercedes-Benz ML320, 2009 Mercedes-Benz GL320, and 2008 Mercedes-Benz ML320. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| Check values for crankcase | ENGINE 628.960/961/962/963, 629, 642 | BE01.40-P-1000-02F |
| Check values for crankcase | ENGINE 604, 605, 606, 611, 612, 613, 646, 647, 648... | BE01.40-P-1000-02B |
| Check values for cylinder bore | ENGINE 646.951/8/961/962/963/966 | BE01.40-P-1000-01M |
| Check values for cylinder bore | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 647, 648... | BE01.40-P-1000-01E |
| Check values for cylinder head | ENGINE 646.951/961/962/963/966, 647.961, 648.960/961, 651 | BE01.30-P-1000-02E |
| Check values of crankcase | ENGINE 112, 113, 155... | BE01.40-P-1000-02E |
| Check values of cylinder head | ENGINE 112, 113, 137, 155, 275, 285... | BE01.30-P-1000-02D |
| Compression | ENGINE 103, 104, 119, 120 | BE01.00-P-1000-01C |
| Compression pressure | ENGINE 104.900, 111/, 601/, 602/982/983 | BE01.00-N-1000-01A |
| Compression pressure | ENGINE 113.967/990 in MODEL 219 | BE01.00-P-1000-01J |
| Compression pressure | ENGINE 266 | BE01.00-P-1000-01I |
| Compression pressure | ENGINE 668.914/940/941/942 | BE01.00-P-1000-01F |
| Compression pressure | ENGINE 166.940/960/961/990/991/995 | BE01.00-P-1000-01E |
| Compression pressure | ENGINE 112, 113, 137, 155, 275, 285... | BE01.00-P-1000-01D |
| Compression pressure | ENGINE 111, 156, 157, 159, 271, 272, 273, 276, 278... | BE01.00-P-1000-01B |
| Compression pressure | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 629, 640, 642, 646, 647, 648, 651... | BE01.00-P-1000-01A |
| Cylinder head/cylinder head bolts | ENGINE 103, 104, 111, 112, 113, 119, 120, 137 155, 157, 271, 272, 273, 275, 276, 278, 285... | BE01.30-P-1000-04B |
| Cylinder head/cylinder head bolts | ENGINE 668.914/940/941/942 | BE01.30-P-1000-04D |
| Cylinder head/cylinder head bolts | ENGINE 640 | BE01.30-P-1000-04G |
| Cylinder head/cylinder head bolts | ENGINE 651 | BE01.30-P-1000-04H |
| Cylinder head/cylinder head bolts | ENGINE 166.940/960/961/990/991/995 | BE01.30-P-1000-04C |
| Cylinder head/cylinder head bolts | ENGINE 601, 602, 603, 604, 605, 606, 611, 612, 613, 628, 629, 642, 646, 647, 648... | BE01.30-P-1000-04A |
| Cylinder leaktightness | ENGINE all | BE01.00-P-1000-02Z |
| Inspection data for crankcase | ENGINE 601.943, 602.980/982/983/984/985 | BE01.40-N-1000-02D |
| Inspection data for cylinder head | ENGINE 611, 612, 613, 629, 642... | BE01.30-P-1000-02B |
| Inspection data of crankcase | ENGINE 640 | BE01.40-P-1000-02J |
| Inspection data of crankcase | ENGINE 271 | BE01.40-P-1000-02H |
| Inspection data of crankcase | ENGINE 137, 275, 285 | BE01.40-P-1000-02G |
| Inspection data of crankcase | ENGINE 111, 166.940/960/990, 668.940/941/942 | BE01.40-P-1000-02A |
| Test specifications for a cylinder bore | ENGINE 137.970, 275.950/951/953/954/98, 285.950/98 | BE01.40-P-1000-01G |
| Test specifications for crankcase | ENGINE 651 | BE01.40-P-1000-02K |
| Test specifications for cylinder bore | ENGINE 651 | BE01.40-P-1000-01O |
| Test specifications for cylinder bore | ENGINE 271.8/9 | BE01.40-P-1000-01H |
| Test specifications for cylinder bore | ENGINE 112, 113, 155... | BE01.40-P-1000-01F |
| Test specifications for cylinder bore | ENGINE 111.920/921/940/941/942/943/944/945/946/947/960/961/970/973/974/975/977 | BE01.40-P-1000-01A |
| Test values for crankcase | ENGINE 601, 602.91/96, 603.91/96/97/97 | BE01.40-P-1000-02D |
| Test values for crankcase | ENGINE 120 | BE01.40-P-1000-02C |
| Test values for cylinder bore | ENGINE 601.943, 602.980/982/983/984/985 | BE01.40-N-1000-01B |
| Test values for cylinder bore | ENGINE 103/, 104/ | BE01.40-P-1000-01B |
| Test values for cylinder bore | ENGINE 119 | BE01.40-P-1000-01C |
| Test values for cylinder bore | ENGINE 642 | BE01.40-P-1000-01J |
| Test values for cylinder bore | ENGINE 640 | BE01.40-P-1000-01K |
| Test values for cylinder bore | ENGINE 272.91/92/94/95/96/97/98/99, 273.92/96/97/96 | BE01.40-P-1000-01I |
| Test values for cylinder bore | ENGINE 120 | BE01.40-P-1000-01D |
| Test values for cylinder head | ENGINE 601.943, 602.980/982/983/984/985 | BE01.30-N-1000-02D |
| Test values for cylinder head | ENGINE 640 | BE01.30-P-1000-02G |
| Test values for cylinder head | ENGINE 120 | BE01.30-P-1000-02C |
| Test values for cylinder head | ENGINE 604, 605, 606/, 611, 612.961/962/963/965/966/967/990, 613 | BE01.30-P-1000-02A |
| Test values for cylinder head bolts | ENGINE 601, 602/982/983 | BE01.30-N-1000-01A |
| Test values for cylinder head bolts | BE01.30-P-1000-01A | |
| Test values/model assignment for prechamber | ENGINE 601, 603, 604, 605, 606 | BE01.30-P-1000-03A |