Mobile phone system, function - GF82.70-P-0007CWJ
MODEL 204.0 /2 with CODE (498) Japan version up to Model Year 8
Function requirements
- Status "circuit 30 ON" or "circuit 15R ON"
- Mobile phone system operating error-free
- One mobile telephone network is available in sufficient strength and quality
- Mobile phone electrical connector (X39/37) connected to communication control unit (N123/6)
- Compatible mobile phone connected to pre-installed connector or Bluetooth-compatible mobile phone in the vehicle and logged on to the COMAND controller unit (A40/3)
The connector is used to connect the various mobile phones to the communication control unit.
A Bluetooth-compatible mobile phone can only be operated in the vehicle if a mobile phone is not connected to the connector.
General
The mobile phone system enables mobile phones of the Personal Digital Cellular (PDC), Code Division Multiple Access (CDMA) and Freedom of Mobile Multimedia Access (FOMA) network types to be operated in the vehicle.
The mobile phone system consists of the following component functions:
- Switch on/off characteristics
- Establish call and terminate call
- Accept call (incl. toggle)
- Electronic mail (email)
- Internet mode (i-mode)
- Voice control
Operating instructions
The mobile phone system can be operated using the following:
- Buttons on the mobile phone
- Phone buttons on the COMAND controller unit
- Audio/COMAND control panel (A40/9)
- Left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111)
- Voice control system (VCS [SBS])
Address book supplemental information
The user can manage all the contact data in the address book (view, edit, add, delete and create). The address book contains the address entries stored in the COMAND controller unit. A mobile phone connected to the connector can also load data (names and standard numbers) from the mobile phone's telephone book into the COMAND controller unit's address book.
The data from the mobile phone's telephone book is also permanently available, even when the mobile phone is no longer attached to the connector.
Address entries can only be removed by deleting individual entries or by deleting the entire address book.
The Bluetooth interface of the mobile phone and the Bluetooth antenna (A2/91) can be used to transmit data from other external devices (e.g. PDA, laptop, etc.) into the address book. The COMAND controller unit's PCMCIA slot can be used to transfer vCards from a PCMCIA card into the address book.
These data are then permanently available as address entries. Address-relevant mobile phone system applications can be directly started and supplied with the stored data via address book entries.
Address entries can contain the following:
- Names (surname and first name)
- Postal addresses (private or business)
- Telephone numbers (private, business, fixed-line network, mobile or car)
- 2 email addresses
- One URL address
- Geo position (private or business)
- Company name
- Notes
- URL
A total of 150 entries with voice commands (voice tags) is available for the voice control system. The address book displays the address entries stored in the COMAND controller unit and the data loaded from the mobile phone's telephone book.
"Private mode" supplemental information
When in "private mode" the user can make a telephone call without other vehicle occupants being able to hear the conversation. To make a call in "private mode", one of the following processes must be completed:
- Disconnection of mobile phone from connector during a telephone call in handsfree mode
- Call acceptance in handsfree mode and subsequent activation of "private mode" menu item via the Audio/ COMAND control panel and the Audio/COMAND display (A40/8) when the mobile phone is disconnected from the connector and operated via Bluetooth
- Establishment of call using buttons on mobile phone when the mobile phone is disconnected from the connector and operated via Bluetooth
"Seamless Switch" supplemental information
"Seamless Switch" means either that an existing call on the mobile phone is not terminated when the phone is disconnected from the connector, or that an existing call is forwarded to the COMAND controller unit when the mobile phone is attached to the connector.
Toggle supplemental information
The user can switch back and forth between telephone calls with 2 people. While the user talks to one person on the line, the connection to the other is put on hold. However, voice transmission is interrupted.
| Mobile phone system, location of components | Model 204.0 | GF82.70-P-0007-01CWJ | |
| Model 204.2 | GF82.70-P-0007-01CSJ | ||
| General information on mobile phone system | Bluetooth | GF82.70-P-0007-06CWJ | |
| Telephone switch-on/switch-off characteristics, function | GF82.70-P-2007CWJ | ||
| Setting up/ending phone call, function | GF82.70-P-2008CWJ | ||
| Phone call acceptance, function | GF82.70-P-2009CWJ | ||
| Electronic mail (email), function | GF82.70-P-2015CWJ | ||
| Internet mode (i-mode) function | Code Division Multiple Access (CDMA) or Freedom of Mobile Multimedia Access (FOMA) | GF82.70-P-2016CWJ | |
| Voice control, function | GF82.70-P-3020CWJ |