LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2008 >> C350 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System - Basic Knowledge - C63/C350 (204) - 2 Of 3 >> Basic Knowledge >> Electronic mail (email), function - GF82.70-P-2015CWJ

Electronic mail (email), function - GF82.70-P-2015CWJ

MODEL 204.0 /2 with CODE (498) Japan version up to Model Year 8 

Function requirements 

IMPORTANT No more than 3 providers can be set.

IMPORTANT The function is described with a mobile phone attached to the connector. Any differences with a mobile phone not attached to the connector and one operated using Bluetooth are described as information points in each respective component function.

General 

The email application enables the user to manage his/her emails (e.g. to read or compose).

The following email functions are available:

The email function consists of the following component functions:

Operating instructions 

Emails can only be composed, read and sent over the Audio/ COMAND control panel (A40/9) and the Audio/COMAND display (A40/8).

Receive and read emails function sequence 

Incoming emails are received by the COMAND controller unit in the following way:

Emails can now be read by running the email application in the "ComTEL/telephone" menu item of the Audio/COMAND display. This is done with the aid of the "TEL" phone button on the COMAND controller unit and the Audio/COMAND control panel.

The control signals from the COMAND controller unit telephone buttons are processed internally. The control signals from the Audio/COMAND control panel are forwarded over the telematics CAN to the COMAND controller unit.

The menu item, email application and the selected email are shown on the Audio/COMAND display by the COMAND controller unit over a low voltage differential signaling (LVDS) line.

IMPORTANT On a mobile phone not connected to the connector and operated over Bluetooth, the COMAND controller unit receives emails in the following way:

Compose and send emails function sequence 

IMPORTANT Emails can only be composed and sent over the Audio/ COMAND control panel and the Audio/COMAND display in the email application in the "ComTEL/telephone" menu item of the Audio/COMAND display.

The email application in the "ComTEL/telephone" menu item is selected using the "TEL" phone button on the COMAND controller unit and the Audio/COMAND control panel. The control signals from the COMAND controller unit telephone buttons are processed internally. The control signals from the Audio/COMAND control panel are forwarded over the telematics CAN to the COMAND controller unit. The menu item, email application and the composed email are shown on the Audio/COMAND display by the COMAND controller unit over a LVDS line.

Emails are then sent to the receiver by the COMAND controller unit in the following way:

IMPORTANT On a mobile phone not connected to the connector and operated via Bluetooth, the COMAND controller unit sends emails to the receiver in the following way:

REFER TO SYSTEM WIRING DIAGRAMS Electrical function diagram for phone, email, Internet   PE82.70-P-2057-99FAA
  Front central operating unit, component description A40/9 GF54.21-P-4500CW
  Cockpit central display, component description A40/8
High
GF54.30-P-6100CWH
  Telephone and GPS roof antenna component description A28/11 GF82.62-P-4119CW 
  Bluetooth antenna component description A2/91 GF82.62-P-4201CW 
  Communication control unit, component description N123/6 GF82.70-P-5003CWJ 
  Mobile phone interface, component description X39/37 GF82.70-P-5004CWJ 
  COMAND controller unit, component description A40/3 GF82.85-P-3136CWJ