Air Intake, Turbocharging - 219 Chassis
- General Information
- Testing & Repair
- Remove/install air filter housing
- Remove/install air cleaner housing
- Remove/install the air duct housing - AR09.20-P-0080TS
- Remove/install intake manifold - AR09.20-P-1310TY
- Detach/attach connecting flange on intake manifold - AR09.20-P-1311AMG
- Remove/install resonance intake manifold
- Remove, install the tumble flap and resonance flap switchover valve at the intake manifold - AR09.20-P-1990TS
- Remove/install the tumble flap position sensor at intake manifold - AR09.20-P-1995TS
- Remove/install top charge air distributor - AR09.41-P-1320TZ
- Remove/install charge air cooler - AR09.41-P-6817TZ
- Remove/install low temperature radiator - AR09.41-P-6831TZ
- Removing and installing the circulation pump for the low temperature water circuit - AR09.41-P-6925TX
- Remove/install compressor - AR09.50-P-4705TZ
- Remove/install electromagnetic clutch for compressor - AR09.50-P-4786R
- Remove/install compressor belt pulley - AR09.50-P-4787R
- Remove/install air recirculation flap actuator - AR09.50-P-8843T
- Test & Adjustment Values
- Maintenance
- Torque Specifications
- Special tools