LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> E500 Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System - Body - Retrofitting & Conversion - 211 Chassis - 2 Of 2 >> Retrofitting & Conversion >> Retrofit satellite radio (SDAR) - AZ82.60-P-0006T >> Notes

Retrofit satellite radio (SDAR) - AZ82.60-P-0006T: Notes

MODEL 211.0## 1# with CODE (494) USA version with CODE (806) Model year 2006 except CODE (413) Panoramic sliding roof except CODE (924) Bivalent natural gas drive 

Fig 1: Identifying SDAR Control Unit And SDAR Antenna Location
G04986627
Fig 2: Identifying Damping Material, Catch Hook, Carrier Plate Cover Ans Bolt
G04986628
REMOVING Removal    
NOTES Notes on avoiding damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
DANGER Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A
1 Disconnect battery ground cable    
REFER TO TESTING & REPAIR     AR54.10-P-0003T
NOTES Notes on battery   AH54.10-P-0001-01A
IMPORTANT Notes on AGM battery   AH54.10-P-0002-01A
2 Remove trim from rear end center assembly    
REFER TO TESTING & REPAIR     AR68.30-P-4785T
3 Remove side paneling in trunk IMPORTANT On left and right.  
REFER TO TESTING & REPAIR   Vehicles without  through-loading feature (code 287). AR68.30-P-4800T
REFER TO TESTING & REPAIR   Vehicles with  through-loading feature (code 287). AR68.30-P-4800TA
4 Remove soundproofing (40), remove bolts (41) (see enlarged detail at bottom), use suitable tool to release catch hook (42) (see enlarged detail at top) and remove cover on carrier plate (43)    
5 Remove paneling from trunk lid    
REFER TO TESTING & REPAIR     AR68.30-P-8150T
INSTALLING Install     
6 Retrofit satellite radio control unit   AZ82.60-P-0006-01T 
DANGER Risk of explosion  and caused poisoning by solvent vapors and gasses. Risk of injury  to skin and eyes when working with corrosion protection agents. Never spray anticorrosion agents on flames or glowing hot objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. AS97.00-Z-0001-01A
7 Retrofit satellite radio antenna   AZ82.60-P-0006-02T 
    Zinc dust paint suitable for spot welding *BR00.45-Z-1001-07A 
8 Retrofit antenna line IMPORTANT Antenna line for satellite radio (SDAR). AZ82.70-P-0002-01T 
9 Retrofit MOST fiber optic cable wiring harness IMPORTANT MOST fiber optic cable wiring harness for satellite radio (SDAR). AZ82.60-P-0006-03T 
10 Retrofit wiring harness. IMPORTANT Wiring harness for satellite radio (SDAR). AZ82.70-P-0001-04TA
11 Install in the reverse order IMPORTANT Steps 5 up to 1.  
12 Perform basic programming    
REFER TO TESTING & REPAIR     AR00.19-P-0200T
13.1 Flash MOST components IMPORTANT Flash those MOST components that do not have the latest software release.  
REFER TO TESTING & REPAIR   Programming of control units AR54.21-P-0014Y
    STAR DIAGNOSIS diagnosis system. *WH58.30-Z-1048-13A 
14 Perform version coding subsequently IMPORTANT Perform variant coding using STAR DIAGNOSIS to activate the satellite radio (SDAR) functions. After completing variant coding, perform a quick test and delete the fault memory.  
    STAR DIAGNOSIS diagnosis system. *WH58.30-Z-1048-13A 
15 Carry out function check of satellite radio (SDAR).    
16 Add special equipment to the vehicle data card and to the on-line vehicle data card IMPORTANT Enter SIRIUS satellite radio (code 536).  
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnosis system, Compact Passenger Car 6511 1801 00
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1001-07A Zinc dust paint suitable for spot welding A 000 986 34 42
PARTS ORDERING NOTES

Part no. Designation Quantity
B6 783 00 69 SDAR assembly kit 1
B6 783 00 89 SDAR wiring harness 1
B6 783 00 91 SDAR-MOST wiring harness 1
B6 783 00 60 SDAR receiver 1
B6 783 00 93 SDAR antenna line 1
B6 783 00 80 SDAR antenna, black 9040 As required
B6 783 00 81 SDAR antenna, cubanite silver 9723 As required
B6 783 00 82 SDAR antenna, iridium silver 9775 As required
B6 783 00 83 SDAR antenna, alabaster white 9960 As required
B6 783 00 84 SDAR antenna, primed As required