Removing and installing cover on mirror triangle - AR88.70-P-9080G

MODEL 170, 208, 168 

Model 170 

Fig 1: Identifying Cover On Mirror Triangle Remove/Install Components - Shown On Model 170

Model 208.3 

Fig 2: Identifying Cover On Mirror Triangle Remove/Install Components - Shown On Model 208.3

Model 168 

Fig 3: Identifying Cover On Mirror Triangle Remove/Install Components - Shown On Model 168

	Removal, installation
1	Remove cover on outside rearview mirror		AR88.70-P-9040G
2	Remove drive for gear adjustment		AR88.70-P-9060G
3	Remove complete outside rearview mirror		AR88.70-P-9000G
4	Unscrew screws (2) and remove cover (1)		*WH58.30-Z-1040-06A
5	Reinstall in opposite order	Model 208.3 Observe catches (arrows)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1040-06A	Torx screwdriver twist T10